Determine whether anything must be removed (such
as the control console) before the breaker strips can be removed.
Attempt to remove the strip by pulling it away from the refrigerator
case. If that does not work, gently slide a putty knife under
the strip. Instead of prying the strip (which may damage the case
or strip) slide the knife along the seam, rocking it where necessary
to separate the strip. Some breaker strips are held in place with
a sealant, which will have to be cut with a utility knife.
If the insulation is damp or has an unpleasant
odor, leave the strip off to allow the insulation to dry. You
may alternatively use a hair dryer set on low to dry the insulation.
Replace the breaker strip using a food grade
sealant as necessary.
